Suche

Semmelbrösel

Startseite tesla model 3 highland 2024 Tesla Model 3 Highland 2024 – E-Mobility Shop

Tesla Model 3 Highland 2024 – E-Mobility Shop

€ 21.50 · 5 (115) · Auf Lager

The Tesla Model 3 2024 (project name Highland) has been sold in Germany since 10/2023. The products that fit these models can be found here.

Welcome light with Tesla logo as entry light for Tesla Model S, 3, X and Y.

When the door is opened, the logo appears on the floor.

The latest batch is designed with a metal-reinforced case. This makes the LED light even more robust.

Very easy installation by replacing the existing light, easy to do even for the layman without specialist knowledge. We enclose installation instructions with the delivery.

The set consists of 2 entrance lights with logo and two plastic lever tools are included with each order.

The Tesla Model S, 3, X and Y have a camera installed above the mirror for the interior.

With this camera cover you have the choice to protect your privacy.

Simply slide the slider in front of the camera and privacy is assured.

This camera cover can also be used on laptops and is not limited for use in the Tesla Model 3 or Y.

The camera is in the bracket above the mirror.

The self-adhesive back makes installation extremely easy and the cover can also be removed without leaving any residue.

Jack Pad lift mount for the Tesla Model S, 3, X and Y (4 pieces as a set)

Not all workshops and tire services have the right mounts to lift the Tesla Model S, 3, X and Y without damaging the battery.

This is why these lifting platform recordings should be stowed in the trunk (e.g. in the cable compartment below the trunk) so that you are always well prepared for a visit to the workshop. The recording also works with standard jacks.

- Solid metal construction with protective rubber ring

- Geruchsneutral

- Set of 4 with pouch

Significantly brighter light in the entry area and in the trunk thanks to the LED lights, suitable for Tesla Model S, 3 and X as a set of 2.

Please note: the LEDs do not fit in the trunk of the Model Y because round lights are installed there. However, these LEDs fit in the doors and in the footwell.

These LED lights have 18 LEDs instead of a single LED in the original LED light, making them significantly brighter.

Quick installation by simply replacing the existing lights within a minute. The mechanical dimensions are the same.

Box contents: 2 LED lights

Plastic lever tools are included per order.

Exactly the right product for those who would like to spend the night in Model 3.
With the Privacy Shields you get the right amount of privacy.

Very easy to assemble and a perfect fit.

Thanks to the suction cups, the door can be opened without the privacy shields falling down, even if the privacy shields are installed.

The silver exterior keeps most of the heat out when the sun shines.

The inside is black.

6-piece set for the side windows of Model 3:
- 2 shields for the two front windows
- 2 shields for the two rear windows
- 2 covers for the triangular windows at the rear of the C-pillar

The ideal addition to this set is the sun protection element / privacy shield for the windshield.

DUAL MOTOR logo for Tesla available in three variants:

Silver with red underscore or

Black with a black or red underline.

Self-adhesive 3D letters with a red underline, which stands for the performance model at Tesla. In this context, dual motor means all-wheel drive, since there is one motor at the front and one at the rear, where it drives the respective axle.

The assembly is made possible by the self-adhesive letters and the positioning aid (the letters are attached to a transparent film on the top.

For assembly, simply clean the underside well, align the logo and stick it on. Then pull off the transparent film - done.

Air mattress suitable for many cars, such as Tesla Model S, 3, X and Y.

A 12V electric air pump is included. This allows the air mattress to be inflated perfectly.

Non-slip performance pedal pads for the Tesla Model 3 and Y - from 2022
(without the cross of the older versions).

2-piece for power pedal and brake

Stainless steel with non-slip rubber bumps for safe operation without slipping.

Easy assembly in just a few minutes.

Note: No ABE or parts certificate, we recommend individual acceptance by the TÜV

1-piece for the windshield of Model 3

The silver exterior keeps most of the heat out when the sun shines, the interior is black.

Very easy to assemble and a perfect fit.

This sun protection element for the windscreen is the ideal complement to the Privacy Shield Set for the side windows.
Exactly the right product for those who would like to spend the night in Model 3. Ideal for camping.

With the Privacy Shield you get the right amount of privacy.

Ventilation grille for the Model 3 - suitable for all current Model 3, including 2023 Model 3

The ventilation grille prevents leaves and other larger objects from entering the ventilation duct.
If leaves penetrate there, they cause unpleasant noises there and, in the worst case, can clog the cabin filter.

This is prevented with this ventilation grille.

Optimum fit and easy assembly within a minute.

The ventilation grille is only glued in place and can be removed without leaving any residue if required.

Significantly brighter light in the entry area and in the trunk thanks to the LED lights, suitable for Tesla Model S, 3, X and Y as a set of 2.

The colors blue, red, green, purple and amber are available.

These LED lights have 18 LEDs instead of a single LED in the original LED light, making them significantly brighter.

Quick installation by simply replacing the existing lights within a minute. The mechanical dimensions are the same.

One color LED light is included in the package.

A plastic lever tool is included with each order.

High-quality wiper blades for the Tesla Model 3 and Y from the German manufacturer Bosch for the windshield.

High-quality windscreen wipers in OEM quality.

BOSCH AeroTwin A 102 S
Art.-Nr.: 3 397 014 116-KCO

Contents: 1 pair of wiper blades suitable for Tesla Model 3 and Y

Lengths: 650mm (26'') and 475mm (19'')

Made in Serbia

Cabin filter for Tesla Model 3 and Y available as a standard version or as a HEPA filter version.

There are 2 air filters in the packaging.

Available in 2 variants:
- Standard cabin filter
- HEPA-Filter

Includes mounting material (pry tool and Torx screwdriver)

Tesla recommends a replacement at least every 2 years.

Key card holder with Tesla logo to protect the key card.

Complete set with enclosed loop and mounting material.

The 4-piece pry tool set consists of 4 different plastic tools and is ideal for removing paneling and car parts without damaging them.
With this tool set, fairing parts can be removed safely and quickly.

Organizer for the center console of the Tesla Model 3 model year 2024 (Highland).

So that there are no noises when small parts slide back and forth, subdivisions are provided and the surface is flocked.
There are several compartments for e.g. coins (for the shopping cart, etc.) for the key card and other items.

Prevent a heated interior with the sun protection elements.

Available in black and gray.

- Easiest assembly

- no tools necessary

- keeps the heat outside the car

- UV protection can be retrofitted as an option

- no more sun glare from above

6-piece set consisting of

- 2 sun protection roof elements

- 2 matching insulating foils

- 2 elements for the triangular windows

Electric car charging cable 32A 3-phase, 22kW, Type2/Type2, 5 meters long with green or black cable

This means that every electric car with a type 2 connection (BEV and also PHEV) can be charged at public AC charging stations with up to 32A and three-phase, for example.

Of course, single-phase or two-phase charging can also be used. It can also be charged with lower currents. With this charging cable you are prepared for all AC charging situations.

A charging cable bag from the E-Mobility Shop is included with the charging cable free of charge.